Go to Post A coin flip is a wonderful thing. Not because it makes the decision for you, but because when the coin is in the air, you realize what you really want. - ATannahill [more]
Home
Go Back   Chief Delphi > Technical > Programming > NI LabVIEW
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Spotlight this post!  
Unread 26-02-2010, 15:22
kavisiegel kavisiegel is offline
Registered User
FRC #0061 (The Shifters)
Team Role: Programmer
 
Join Date: Jan 2010
Rookie Year: 2009
Location: Milford MA
Posts: 37
kavisiegel is an unknown quantity at this point
Re: 0 = 1, but 1 = 1 as well?

Quote:
Originally Posted by Egg 3141592654 View Post
so a day before the robot shipped i went to do a final diagnostic on the robot to make sure that everything that was plugged in worked. Our team has 3 solenoids labeled in labview 1, 2, 3 respectively (see picture if needed). I know that 1 = 0 and 2 = 1 etc. however, lately 1 would trigger 1 on the cRio (not 0), and 2 would trigger 2 (not 1). I have neither an idea on what to do, nor an idea of how to fix this.

PS, when debugging, does light on = true or false? I assume that on = true.
There shouldn't be a solenoid zero. The solenoid numbers in LabVIEW are directly allocated to the labeled slots in the cRIO Pneumatics Bumper.. which is 1-8.

Most of the time, counting starts at zero, but in this specific case... one is one, and two is two... etc.

Also, yes, true means it's on or open.
__________________
www.team61.com
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Camera did not work for well at the regionals, but worked great at home. Alan Ing Programming 12 17-04-2006 17:43
Aim Well Alekat General Forum 19 14-02-2006 12:46
Well done 388.... Useless member Regional Competitions 4 10-03-2003 00:00
well lets see... archiver 2001 0 23-06-2002 22:08
So, well, um, what now? Joe Matt General Forum 23 14-06-2002 08:27


All times are GMT -5. The time now is 22:02.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi