Quote:
Originally Posted by JasonStern
On a semi-related note, shouldn't the sync code be trusted as well? Otherwise I see a potential case where you define the set point when the robot is enabled, the robot then gets disabled, and then the sync command gets sent. Or am I missing something else that would prevent this from happening?
|
From looking at the jag source it appears that it would indeed enable while the robot is disabled, but it would time out after 100ms and turn back off. While it is a shortcoming of the jag firmware, it isn't a significant safety risk.
Joe
“FIRST is your experience and you cannot let anyone else hinder what you can achieve.” - fuzzwaz [more] 
28-02-2010, 21:16
Similar Threads
Threaded Mode