|
|
|
 Of course this should be your decision- not the FIRST community's. Take charge of your destiny. - Wayne C. [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Of course this should be your decision- not the FIRST community's. Take charge of your destiny. - Wayne C. [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: USB power?
Look for usb extension cables of any sort, then just cut off the cable part and use the power wires for your project.
|
|
#2
01-03-2010, 20:03
|
|||
|
|||
|
Re: USB power?
http://cgi.ebay.com/NEW-USB-2-0-A-MA...item5190b2459f
Just checken if that would be ok. Looks to me like the wires arnt colored (or Im just paranoid about screwing this up...)
|
|
#3
04-03-2010, 09:45
|
|||||
|
|||||
|
Re: USB power?
Brandon,
The batteries in iPods die after a while and are fairly easy to replace. There are many sources on the Internet and you can also find detailed instructions on how to open the case without damaging anything. Most places that sell the battery also include case openers at no charge. The battery comes with a flex circuit board already attached, there is no soldering. Simply open the case, remove the battery and release the flex. Reverse operation with the new battery and close it up. Then charge of course, the battery is not shipped charged.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Power distribution board does not give power to access point | bitsoglass | NI LabVIEW | 3 | 17-02-2009 12:07 |
| away around the USB chicklet for using USB Controllers | Stobei | Programming | 2 | 26-01-2008 14:27 |
| USB Chicklet Power | Smoking_Gun | Control System | 5 | 25-02-2007 02:06 |
| Gameport to Usb cable vrs. Usb Chicklet | haywirerobotics | Control System | 4 | 25-01-2007 19:03 |
| USB I/O | CJO | Control System | 2 | 15-10-2005 20:17 |
Hybrid Mode
