Sending data to the Robot

dekker120 · #1 03-03-2010, 17:05

ok... so I know that you can send back digital and analog input feeds from the driver station to the robot... but how do you send back a value from within the dashboard.. (i.e. a numeric indicator) to the robot?

Vikesrock · #2 03-03-2010, 17:11

Quote:

Originally Posted by dekker120

ok... so I know that you can send back digital and analog input feeds from the driver station to the robot... but how do you send back a value from within the dashboard.. (i.e. a numeric indicator) to the robot?

The dashboard data connection is unidirectional. Data goes from the robot to the dashboard, but no data goes back from the dashboard to the robot.

If you are not using the Cypress PSoC as part of your controls this year, you might want to look into using Virtual I/O to do whatever it is you are trying to do.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sending data from the DS back to the robot	non847	Programming	6	24-01-2010 11:49
Sending user data, parsing user data.	demosthenes2k8	NI LabVIEW	3	30-01-2009 13:51
Sending data from RC to OI	Nathan	Programming	7	03-02-2008 22:32
Sending data back to the OI	DanDon	Programming	13	26-01-2006 15:17
Sending Data	Raven_Writer	Programming	8	11-09-2003 16:28