|
|
|
 Being a mentor doesn't have an age requirement. As long as you are positively influencing someone you could be called a mentor and a role model. - EricLeifermann [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Being a mentor doesn't have an age requirement. As long as you are positively influencing someone you could be called a mentor and a role model. - EricLeifermann [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#14
04-03-2010, 10:51
|
|||||
|
|||||
|
Re: Charging pneumatics system before match
In the last three years that we've used pneumatics (2006, 2007, and 2008) we would pressurize the system prior to the beginning of the match. We would wait until there was about 1 to 2 minutes left in the match before us and then tether our robot and let the compressor run. This meant that our robot was only charged for a minute or two at most before the match actually started.
Provided this approach is deemed acceptable this year we will probably do the same. Also, our robot will be set so that the kicker is in the fired position as the starting position. This should help to prevent any accidents that could be caused by the kicker firing by mistake. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Charging a System | Zultraranger | Pneumatics | 7 | 05-02-2008 21:08 |
| pic: MARS making repairs before the last match | Billfred | Extra Discussion | 3 | 10-09-2007 16:52 |
| Spring pulling before match or while in match?? | Bomberofdoom | Technical Discussion | 3 | 11-01-2007 08:03 |
| pic: 1072 before the match | Billfred | Extra Discussion | 1 | 06-01-2007 22:30 |
| Pump operation before match | Jeff Waegelin | Pneumatics | 19 | 29-04-2003 09:42 |
Threaded Mode