Relay Code

byteit101 · #1 08-03-2010, 20:45

you only need one if you are using slot 4 (default)
if you are not in slot 4, the first is the slot (if it is not 4, it's probably 6), the second is the relay port (on the DSC)
if you have it in 4, use relay(relayPort)

mikets · #2 08-03-2010, 21:31

There are two possible constructors for the Relay class (from relay.h). Here are their definitions:

Code:

Relay(UINT32 channel, Direction direction = kBothDirections);
Relay(UINT32 slot, UINT32 channel, Direction direction = kBothDirections);

You can find the header files in c:\windriver\vxworks-6.3\target\h\wpilib.

dnrobotics11 · #3 08-03-2010, 23:03

thanks so much guys

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
spike relay code urgent	chris janney	Java	1	21-02-2010 17:55
Relay	Robopanda6	Java	5	07-02-2010 01:08
Spike relay code not working	wywern209	Programming	9	05-02-2010 22:04
C++ Relay Code?	Happyisgood	C/C++	10	16-07-2009 14:54
Intermittent CODE ERROR, followed by uncommanded relay switching	tcj103	Programming	4	22-01-2007 02:59