Quote:
Originally Posted by Kevin Sevcik
We've currently settled on 25% speed as a semi-safe value. We tried 30%, but after a long session of unintentional idling in the pits, the motor was producing some distressing odors.
|
Kevin, could you clarify what you meant here please? When you say "25% speed", did you mean "the voltage that produces 25% of the rated 12 volt no load speed" ?
In other words, adjust the PWM to the unloaded FP to produce a speed of 25% of the rated 12V no-load speed, then - while keeping the same PWM - add load to stall the motor; and it is OK ?
~
if it's likely to break, it probably will - DonRotolo [more] 
11-03-2010, 14:03
Similar Threads
Threaded Mode