Go to Post No robot left behind! - M. Mellott [more]
Home
Go Back   Chief Delphi > Technical > Programming
Reload this Page help from palmyhomebots
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
View First Unread View First Unread  
Thread Tools Rate Thread Display Modes
  #1   Spotlight this post!  
Unread 17-03-2010, 15:28
palmyhomebots's Avatar
palmyhomebots palmyhomebots is offline
Registered User
None #2934
  
Join Date: Mar 2010
Location: palmerston north
Posts: 3
palmyhomebots is an unknown quantity at this point
help from palmyhomebots
i push F5 and this happers

Failed to reset VEX processor


Robot controller failed to respond

possibly not powered on or corrupted firmware.
or low battery condition.
or cable conections between controller and pc are wrong.
or incorrect port is selected on pc

and this is the code


#pragma config(Sensor, in9, jono, sensorTouch)
#pragma config(Sensor, in13, am, sensorDigitalIn)
#pragma config(Motor, port1, RMotors, tmotorNormal, openLoop)
#pragma config(Motor, port2, LMotors, tmotorNormal, openLoop)
#pragma config(Motor, port3, LTrack, tmotorNormal, openLoop)
#pragma config(Motor, port4, RTrack, tmotorNormal, openLoop)

task main()
{
bMotorFlippedMode[LMotors] = 1;
bMotorFlippedMode[LTrack] = 1;


bVexAutonomousMode = false; //deactivates Remote Control Mode


while(1 == 1)
//Autonomous mode code
if(bIfiAutonomousPhase)
{
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(300);
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = -127;
motor[RMotors] = 0;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(700);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(200);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;


}
//user control code
else
{

motor[LMotors] = vexRT(Ch3);
motor[RMotors] = vexRT(Ch2);
if (vexRT(Ch6) < 100)
{
motor[LTrack] = 127;
}
if (vexRT(Ch5) < 100)
{
motor[RTrack] = 127;
}
if (vexRT(Ch6) > 100)
{
motor[RTrack] = motor[LTrack] = 127;
}
else if (vexRT(Ch1) > -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch4) > -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch4) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch1) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
if (vexRT(Ch8) > 100)
{
motor[RMotors] = -127;
motor[LMotors] = -127;
}
if (vexRT(Ch8) < 100)
{
motor[RMotors] = 127;
motor[LMotors] = 127;
}
if (vexRT(Ch7) < 100)
{
motor[LMotors] = 127;
}
if (vexRT(Ch7) > 100)
{
motor[RMotors] = 127;
}
if (vexRT(Ch10) < 100)
{
motor[LTrack] = 127;
}
if (vexRT(Ch10) > 100)
{
motor[RTrack] = 127;
}
if (vexRT(Ch9) > 100)
{
motor[RTrack] = motor[LTrack] = 127;
}
else if (vexRT(Ch9) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
motor[LMotors] = 0;
motor[RMotors] = 0;
}
//When channel 5 down the below code runs
if(vexRT(Ch5) > -100)
{
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(1600);
motor[LTrack] = motor[RTrack] = 0;
}
if (vexRT(Ch11) < 100)
{
motor[RTrack] = motor[LTrack] = -127;
}
if (vexRT(Ch12) < 100)
{
motor[RMotors] = motor[LMotors] = 127;
}
if (vexRT(Ch12) > 100)
{
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(300);
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = -127;
motor[RMotors] = 0;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(200);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
}
//When channel 5.2 is down the below code runs
if(vexRT(Ch11) > 100)
{
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(300);
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = -127;
motor[RMotors] = 0;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(200);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
}
}
}


help me
  #2   Spotlight this post!  
Unread 18-03-2010, 14:48
Mark McLeod's Avatar
Mark McLeod Mark McLeod is online now
Just Itinerant
AKA: Hey dad...Father...MARK
FRC #0358 (Robotic Eagles)
Team Role: Engineer
  
Join Date: Mar 2003
Rookie Year: 2002
Location: Hauppauge, Long Island, NY
Posts: 8,856
Mark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond reputeMark McLeod has a reputation beyond repute
Re: help from palmyhomebots
This the code formatted (use [ code ] and [ /code ] tags), but from the errors it sounds like an electrical/communications connection problem rather than a programming problem.

Code:
#pragma config(Sensor, in9, jono, sensorTouch)
#pragma config(Sensor, in13, am, sensorDigitalIn)
#pragma config(Motor, port1, RMotors, tmotorNormal, openLoop)
#pragma config(Motor, port2, LMotors, tmotorNormal, openLoop)
#pragma config(Motor, port3, LTrack, tmotorNormal, openLoop)
#pragma config(Motor, port4, RTrack, tmotorNormal, openLoop)
 
task main()
{
bMotorFlippedMode[LMotors] = 1;
    bMotorFlippedMode[LTrack] = 1;
 
 
    bVexAutonomousMode = false;            //deactivates Remote Control Mode
 
 
    while(1 == 1)
            //Autonomous mode code
            if(bIfiAutonomousPhase)
            {
                motor[LMotors] = 127;
                motor[RMotors] = 127;
                wait10Msec(400);
                motor[LMotors] = 0;
                motor[RMotors] = 0;
                motor[LTrack] = motor[RTrack] = 127;
                wait10Msec(300);
                motor[LTrack] = motor[RTrack] = 0;
                motor[LMotors] = -127;
                motor[RMotors] = 0;
                wait10Msec(200);
                motor[LMotors] = 127;
                motor[RMotors] = 127;
                wait10Msec(700);
                motor[LMotors] = 0;
                motor[RMotors] = -127;
                wait10Msec(200);
             motor[LMotors] = 127;
                motor[RMotors] = 127;
                wait10Msec(200);
                motor[LMotors] = -127;
                motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
                motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
                motor[RMotors] = 127;
 
 
            }
            //user control code
            else
            {
 
                motor[LMotors] = vexRT(Ch3);
                motor[RMotors] = vexRT(Ch2);
if (vexRT(Ch6) < 100)
                {
                    motor[LTrack] = 127;
                }
if (vexRT(Ch5) < 100)
                {
                    motor[RTrack] = 127;
                }
                if (vexRT(Ch6) > 100)
                {
                    motor[RTrack] = motor[LTrack] = 127;
                }
                else if (vexRT(Ch1) > -100)
                {
                    motor[RTrack] = motor[LTrack] = 0;
                }
                else if (vexRT(Ch4) > -100)
                {
                    motor[RTrack] = motor[LTrack] = 0;
                }
                else if (vexRT(Ch4) < -100)
                {
                    motor[RTrack] = motor[LTrack] = 0;
                }
                else if (vexRT(Ch1) < -100)
                {
                    motor[RTrack] = motor[LTrack] = 0;
                }
if (vexRT(Ch8) > 100)
                {
                    motor[RMotors] = -127;
                    motor[LMotors] = -127;
                }
                if (vexRT(Ch8) < 100)
                {
                    motor[RMotors] = 127;
                    motor[LMotors] = 127;
                }
                if (vexRT(Ch7) < 100)
                {
                    motor[LMotors] = 127;
                }
                if (vexRT(Ch7) > 100)
                {
                    motor[RMotors] = 127;
                }
                if (vexRT(Ch10) < 100)
                {
                    motor[LTrack] = 127;
                }
         if (vexRT(Ch10) > 100)
                {
                    motor[RTrack] = 127;
                }
                if (vexRT(Ch9) > 100)
                {
                    motor[RTrack] = motor[LTrack] = 127;
                }
                else if (vexRT(Ch9) < -100)
                {
                    motor[RTrack] = motor[LTrack] = 0;
                 motor[LMotors] = 0;
                 motor[RMotors] = 0;
}
                //When channel 5 down the below code runs
                if(vexRT(Ch5) > -100)
                {
                    motor[LTrack] = motor[RTrack] = 0;
                    motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(400);
                    motor[LMotors] = 0;
                    motor[RMotors] = 0;
                    motor[LTrack] = motor[RTrack] = 127;
                    wait10Msec(1600);
                    motor[LTrack] = motor[RTrack] = 0;
                }
if (vexRT(Ch11) < 100)
                {
                    motor[RTrack] = motor[LTrack] = -127;
                }
                if (vexRT(Ch12) < 100)
                {
                    motor[RMotors] = motor[LMotors] = 127;
                }
                if (vexRT(Ch12) > 100)
                {
                    motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(400);
                    motor[LMotors] = 0;
                    motor[RMotors] = 0;
                    motor[LTrack] = motor[RTrack] = 127;
                    wait10Msec(300);
                    motor[LTrack] = motor[RTrack] = 0;
                    motor[LMotors] = -127;
                    motor[RMotors] = 0;
                    wait10Msec(200);
                    motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(200);
                    motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(350);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                }
                //When channel 5.2 is down the below code runs
                if(vexRT(Ch11) > 100)
                {
                    motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(400);
                    motor[LMotors] = 0;
                    motor[RMotors] = 0;
                    motor[LTrack] = motor[RTrack] = 127;
                    wait10Msec(300);
                    motor[LTrack] = motor[RTrack] = 0;
                    motor[LMotors] = -127;
                    motor[RMotors] = 0;
                    wait10Msec(200);
                    motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(100);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
                    wait10Msec(300);
         motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(200);
                 motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
                    wait10Msec(200);
                    motor[LMotors] = -127;
                    motor[RMotors] = -127;
         wait10Msec(350);
         motor[LMotors] = 0;
                    motor[RMotors] = -127;
         wait10Msec(200);
         motor[LMotors] = 127;
                    motor[RMotors] = 127;
}
}
}
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 18-03-2010 at 14:50.
  #3   Spotlight this post!  
Unread 01-04-2010, 04:38
palmyhomebots's Avatar
palmyhomebots palmyhomebots is offline
Registered User
None #2934
  
Join Date: Mar 2010
Location: palmerston north
Posts: 3
palmyhomebots is an unknown quantity at this point
Re: help from palmyhomebots
help me with it




#pragma config(Sensor, in9, jono, sensorTouch)
#pragma config(Sensor, in13, am, sensorDigitalIn)
#pragma config(Motor, port1, RMotors, tmotorNormal, openLoop)
#pragma config(Motor, port2, LMotors, tmotorNormal, openLoop)
#pragma config(Motor, port3, LTrack, tmotorNormal, openLoop)
#pragma config(Motor, port4, RTrack, tmotorNormal, openLoop)

task main()
{
bMotorFlippedMode[LMotors] = 1;
bMotorFlippedMode[LTrack] = 1;


bVexAutonomousMode = false; //deactivates Remote Control Mode


while(1 == 1)
//Autonomous mode code
if(bIfiAutonomousPhase)
{
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(300);
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = -127;
motor[RMotors] = 0;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(700);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(200);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;


}
//user control code
else
{

motor[LMotors] = vexRT(Ch3);
motor[RMotors] = vexRT(Ch2);
if (vexRT(Ch6) < 100)
{
motor[LTrack] = 127;
}
if (vexRT(Ch5) < 100)
{
motor[RTrack] = 127;
}
if (vexRT(Ch6) > 100)
{
motor[RTrack] = motor[LTrack] = 127;
}
else if (vexRT(Ch1) > -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch4) > -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch4) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
else if (vexRT(Ch1) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
}
if (vexRT(Ch8) > 100)
{
motor[RMotors] = -127;
motor[LMotors] = -127;
}
if (vexRT(Ch8) < 100)
{
motor[RMotors] = 127;
motor[LMotors] = 127;
}
if (vexRT(Ch7) < 100)
{
motor[LMotors] = 127;
}
if (vexRT(Ch7) > 100)
{
motor[RMotors] = 127;
}
if (vexRT(Ch10) < 100)
{
motor[LTrack] = 127;
}
if (vexRT(Ch10) > 100)
{
motor[RTrack] = 127;
}
if (vexRT(Ch9) > 100)
{
motor[RTrack] = motor[LTrack] = 127;
}
else if (vexRT(Ch9) < -100)
{
motor[RTrack] = motor[LTrack] = 0;
motor[LMotors] = 0;
motor[RMotors] = 0;
}
//When channel 5 down the below code runs
if(vexRT(Ch5) > -100)
{
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(1600);
motor[LTrack] = motor[RTrack] = 0;
}
if (vexRT(Ch11) < 100)
{
motor[RTrack] = motor[LTrack] = -127;
}
if (vexRT(Ch12) < 100)
{
motor[RMotors] = motor[LMotors] = 127;
}
if (vexRT(Ch12) > 100)
{
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(400);
motor[LMotors] = 0;
motor[RMotors] = 0;
motor[LTrack] = motor[RTrack] = 127;
wait10Msec(300);
motor[LTrack] = motor[RTrack] = 0;
motor[LMotors] = -127;
motor[RMotors] = 0;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(100);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(300);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
wait10Msec(200);
motor[LMotors] = -127;
motor[RMotors] = -127;
wait10Msec(350);
motor[LMotors] = 0;
motor[RMotors] = -127;
wait10Msec(200);
motor[LMotors] = 127;
motor[RMotors] = 127;
}
//When channel 5.2 is down the below code runs
if(vexRT(Ch11) > 100)
void MissionImpossible()
{
// 100 = Tempo
// 6 = Default octave
// Quarter = Default note length
// 10% = Break between notes
//
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 933, 7); wait1Msec( 75); // Note(D#, Duration(32th))
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 933, 7); wait1Msec( 75); // Note(D#, Duration(32th))
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 933, 7); wait1Msec( 75); // Note(D#, Duration(32th))
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 933, 7); wait1Msec( 75); // Note(D#, Duration(32th))
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 880, 7); wait1Msec( 75); // Note(D, Duration(32th))
PlayTone( 933, 7); wait1Msec( 75); // Note(D#, Duration(32th))
PlayTone( 988, 7); wait1Msec( 75); // Note(E, Duration(32th))
PlayTone( 1047, 7); wait1Msec( 75); // Note(F, Duration(32th))
PlayTone( 1109, 7); wait1Msec( 75); // Note(F#, Duration(32th))
PlayTone( 1175, 7); wait1Msec( 75); // Note(G, Duration(32th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1398, 14); wait1Msec( 150); // Note(A#, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 784, 14); wait1Msec( 150); // Note(C, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1047, 14); wait1Msec( 150); // Note(F, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1109, 14); wait1Msec( 150); // Note(F#, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1398, 14); wait1Msec( 150); // Note(A#, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 784, 14); wait1Msec( 150); // Note(C, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 0, 27); wait1Msec( 300); // Note(Rest, Duration(Eighth))
PlayTone( 1047, 14); wait1Msec( 150); // Note(F, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1109, 14); wait1Msec( 150); // Note(F#, Duration(16th))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 1398, 14); wait1Msec( 150); // Note(A#, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 880, 108); wait1Msec(1200); // Note(D, Duration(Half))
PlayTone( 0, 7); wait1Msec( 75); // Note(Rest, Duration(32th))
PlayTone( 1398, 14); wait1Msec( 150); // Note(A#, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 831, 108); wait1Msec(1200); // Note(C#, Duration(Half))
PlayTone( 0, 7); wait1Msec( 75); // Note(Rest, Duration(32th))
PlayTone( 1398, 14); wait1Msec( 150); // Note(A#, Duration(16th))
PlayTone( 1175, 14); wait1Msec( 150); // Note(G, Duration(16th))
PlayTone( 784, 108); wait1Msec(1200); // Note(C, Duration(Half))
PlayTone( 0, 14); wait1Msec( 150); // Note(Rest, Duration(16th))
PlayTone( 932, 14); wait1Msec( 150); // Note(A#5, Duration(16th))
PlayTone( 784, 14); wait1Msec( 150); // Note(C, Duration(16th))
return;
)


}
}

}
Closed Thread

« Previous Thread | Portal | Next Thread »

Thread Tools
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help from CD - HexBug Nano Toys R Us Paul Copioli General Forum 14 22-06-2010 13:30
Help from a CS:S player Josh Goodman Chit-Chat 1 12-12-2006 00:24
help importing from inventor JeffO 3D Animation and Competition 3 20-12-2004 13:47
Help Mike Wade from NASA OZ_341 Off-Season Events 0 21-11-2003 00:14
I need Help from you all. nick reynolds Chit-Chat 18 02-11-2001 23:39


All times are GMT -5. The time now is 23:25.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.

Contact Us - Chief Delphi - Rules - Archive - Top

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi