|
|
|
 the programmers are -- um, well, doing what programmers do: drinking more Mt Dew. - Roger [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| the programmers are -- um, well, doing what programmers do: drinking more Mt Dew. - Roger [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
23-03-2010, 10:15
|
||||
|
||||
|
Re: AndyMark Plaction Wheels
We used rivet washers under the head of the rivet and also against the plastic rim on the backside of the rivet to spread the load and keep the rivet head from pulling through the tread or the expanded side from pulling through the plastic rim. Two rivets at each end of the tread, NOT on the centerline.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Plaction and Omni wheels | Edoc'sil | Technical Discussion | 7 | 21-02-2010 12:20 |
| AndyMark Plaction Wheels | Diserasta | Technical Discussion | 1 | 17-01-2010 22:20 |
| Plaction Wheels : 250 Spacers/Review | Ice Berg | General Forum | 2 | 17-01-2010 11:26 |
| AndyMark Wheels | Andy Grady | Inventor | 2 | 05-02-2007 16:49 |
| Friction coefficients for Omni wheels and Mecanum wheels from AndyMark | Andy Baker | Technical Discussion | 11 | 16-12-2006 19:40 |
Threaded Mode