Getting the battery voltage

[Joe Hershberger]

Originally Posted by billbo911

Well, the jumper checked out normal. So now we are at a loss. We will have the robot out of the bag for four hours this Saturday, hopefully we can figure this out.

Does anyone else have any ideas what may be preventing this from working correctly?
Again, it worked fine until we did the last cRio and DS updates.

Any chance your code is now opening channel 8 on its own? This will cause a resource in use error. I'm guessing your module is ok since you said the gyro works... metal shavings in the db15 connectors can kill the slot and make all channels return 0.

If you have both analog modules installed, you could read the battery voltage from the slot 2 module.

-Joe