|
|
|
 Programming isn't that hard once you get the hang of it. It has a steep learning curve like math. One day your trying to figure out 1 1, then the next day they throw x and y at you. Once you understand what x and y represent and learn to think in terms of functions, it's as easy as pi. - sciguy125 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#12
28-03-2010, 08:48
|
|||
|
|||
Re: AndyMark Plaction Wheels
Has anyone else had problems with cracking of this wheel? We lost an entire segment of the rim, spoke to spoke, on one wheel yesterday and had to splint cracks in another. This appears to be happening when going over bump. Cracks seem to form on outside of facing side of wheel first and then propagate through wheel. Since the robot never comes down off of the bump completely square to the floor, the outside of one rim takes more of the impact. This is what we think is causing wheel to crack. At least that is what appears to be happening.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Plaction and Omni wheels | Edoc'sil | Technical Discussion | 7 | 21-02-2010 12:20 |
| AndyMark Plaction Wheels | Diserasta | Technical Discussion | 1 | 17-01-2010 22:20 |
| Plaction Wheels : 250 Spacers/Review | Ice Berg | General Forum | 2 | 17-01-2010 11:26 |
| AndyMark Wheels | Andy Grady | Inventor | 2 | 05-02-2007 16:49 |
| Friction coefficients for Omni wheels and Mecanum wheels from AndyMark | Andy Baker | Technical Discussion | 11 | 16-12-2006 19:40 |
Threaded Mode