|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
More scales and Fitting boxes
Last year the biggest choke point was the scales and the fitting box.
Can FIRST maybe supply each division two or three of these items? After the robots were weighed and sized, we would go to the teams pits and finish the inspection. Just my $.02 and I may be weigh off ![]() |
|
#2
|
|||
|
|||
|
Re: More scales and Fitting boxes
Admit it. This is the only reason you made this post isn't it?
![]() |
|
#3
|
|||||
|
|||||
|
Re: More scales and Fitting boxes
They should have eight of each at least to go with the eight fields. I would think a forward looking FIRST staffer would just have to make it happen.
|
|
#4
|
||||||
|
||||||
|
Re: More scales and Fitting boxes
There are only 7 fields at the Championship, but they do all have Inspection crates. Since the Inspection stations are adjacent to each other, it would not be hard to have three boxes and three scales at each pair of stations. I will try and remember to mention this during set-up.
|
|
#5
|
|||||
|
|||||
|
Re: More scales and Fitting boxes
Quote:
I agree with you though that adding at least 2 more will help. |
|
#6
|
||||
|
||||
|
Re: More scales and Fitting boxes
Looks like Bill heard you.
|
|
#7
|
|||||
|
|||||
|
Re: More scales and Fitting boxes
Guys there were only two inspection stations set up at Champs last year until we were able to find the crates and pull them out. That occurred between 11 and 12 on Thursday.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FIRST weigh in scales | ChuckDickerson | General Forum | 6 | 14-06-2008 19:29 |
| We will have portable scales at VCU and Nationals | DRH2o | Regional Competitions | 2 | 03-02-2007 23:17 |
| CIM Motors and Gear Boxes???? | cdennisxlx2 | Motors | 1 | 08-01-2007 17:02 |
| Take the boxes and run! | Rich Wong | General Forum | 16 | 21-12-2002 00:07 |