|
|
|
 Polycord. It was used in all sorts of ball systems in 2009, and on some of the 2007 claws. It's not too hard to fuse together by hand with some heat and patience. - AustinSchuh [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
31-03-2010, 10:01
|
|||
|
|||
|
Re: New Black Jaguars?
Is anybody having the same Jag cooking issues we had last year (particularly with the Black Jags?
1075 cooked about 3 Jags in WAT this weekend, and 4 or 5 more during build. We do try to be pretty careful about keeping the shavings out, but when making mods in the pits, it can be difficult so I won't say for sure that no shavings were deposited. We lost two steering motor Jags (Denso Window motors, in a 2+2 Invertible Swerve). Perhaps its something to do with the motors? I know at least some of the ones we lost in build were on these same motors. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CAN Bus Control via Black Jaguars -- SOLVED!! | taichichuan | C/C++ | 6 | 15-02-2010 15:11 |
| Black Jaguar Not Taking New Address | duane | CAN | 1 | 06-02-2010 19:55 |
| Black jaguars: not working | ellisk | C/C++ | 55 | 02-02-2010 11:14 |
| Serial to CAN Gateway in new Black Jaguars? | dmcguire3006 | Electrical | 54 | 26-01-2010 07:32 |
| New Jaguars on CAN bus | ellisk | C/C++ | 4 | 21-01-2010 09:53 |
Threaded Mode