|
|
|
 The amount of sense this rule makes is irrelevant. It is still the rule, and breaking this rule violates something that i'm sure all of you have heard of. Does gracious professionalism ring a bell?
- Kate00 [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
08-04-2010, 09:51
|
|||
|
|||
|
Re: Compressor Coding Question
Everything is wired correctly. The pressure switch is connect in the digital side car in DIO 2 and the relay is on the digital side car Relay 2. We replaced the entire spike relay just to make sure that it wasn't that kind of error. In the Begin.vi I want the compressor to start up and run. I tried it in the periodic tasks (the Compressor Start), however everyone said that it needs to go in the begin.vi and let alone. Everytime I run the code I expect the compressor to come on but it doesn't.
Oddly before it worked when I created a seprate vi that had Open>>Start in the 100ms periodic tasks - the problem was the allocation error. I fixed it by moving it to begin like it was supposed to and now nothing works ps. thnks |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Coding Relay with Compressor | Poke2201 | NI LabVIEW | 24 | 19-02-2010 18:31 |
| Coding Question | ZP8892 | Programming | 1 | 18-01-2010 20:04 |
| Major compressor question | star_lancer | NI LabVIEW | 3 | 16-02-2009 22:48 |
| Air Compressor Question | Jrocklz | Pneumatics | 4 | 17-01-2008 21:36 |
| compressor and light question... | archiver | 2001 | 5 | 24-06-2002 00:47 |
Threaded Mode