|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#27
|
||||
|
||||
|
Re: ZomB: a C# Drag and Drop Dashboard
Ok, while you're at it, install wireshark (http://www.wireshark.org/download.html), and make sure that the packets have the right data:
(do this while the robot is running, and sending "data") open wireshark go to Capture>Interfaces... select your interface (wait to see the one that has incoming packets) by hitting the start next to it in the Filter text box enter udp.dstport == 1165 and click apply after some packets have come in, click one, and make sure it contains (look at the bottom box) @@@451:|grph=0.5|... (or something similar) if you see this, you are good, and can close wireshark. if not, report back (and you can close wireshark for the moment) |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Drag and drop (labview) | kamocat | NI LabVIEW | 7 | 28-10-2008 08:05 |
| Labview Dashboard and updated IFI dashboard spec | Joe Ross | LabView and Data Acquisition | 1 | 04-04-2006 02:04 |
| White Paper Discuss: 2003 Drag-Drop Scoring Program (Flash, HTML version) *UPDATE* | Suneet | Extra Discussion | 0 | 12-01-2006 16:50 |
| Visual Basic - Drag and Drop | Gope | Programming | 11 | 06-01-2003 09:42 |
| Sensing current and/or voltage drop??? | archiver | 2001 | 3 | 23-06-2002 23:21 |