Part Restrictions

EricH · #1 18-04-2010, 21:30

Quote:

Originally Posted by Sixis

i'm gonna have to use a rookie card on this one. I plan on looking but while i'm here can anyone tell me what sort of connections the cRIO can take? Serial? i2c?

The cRIO can take anything coming in from the Digital Sidecar, or on the CAN bus (which is some relative of the i2c).

JamesBrown · #2 18-04-2010, 21:41

Quote:

Originally Posted by EricH

or on the CAN bus (which is some relative of the i2c).

This is not really accurate, read up on CAN, it is at best a very very distant relative of i2c.

The cRIO can read analog and digital inputs, as well as i2c. There is also a serial connection on the cRIO but in the past FIRST has limited its use, of course rules don't always carry from year to year.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts on easing of tape restrictions	Billfred	Technical Discussion	15	29-03-2009 16:54
Pneumatics Part # restrictions	Mike8519	Pneumatics	17	02-02-2008 18:09
Rules and restrictions	seawolf814	Technical Discussion	3	16-01-2008 16:52
Wheel restrictions	seawolf814	Technical Discussion	1	14-01-2008 18:40
Site Restrictions	Darek905	Website Design/Showcase	7	20-04-2003 16:56