|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#24
|
|||
|
|||
|
Re: pic: 4 Inch Wheel Design
if you plan on hexing them (as you said you were) I would HIGHLY recommend roughing the hex while the wheel is on the CNC....
Having made hex broached wheels quite a few times, we have found if you rough the hex out with a .250 cutter, then use the broach, it is easier on the broach, and who ever is broaching.... For your design, it would also help orient the hex on all the parts.... |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: 4 inch Wheel Render | Chris is me | Extra Discussion | 25 | 15-05-2010 18:43 |
| 4 inch Wheel of Doom | R.C. | SolidWorks | 25 | 26-11-2008 23:57 |
| pic: 5 Inch Wheel | RMS11 | Extra Discussion | 24 | 18-08-2008 23:55 |
| pic: My wheel/leg design | mechanicalbrain | Extra Discussion | 17 | 07-10-2005 12:01 |
| 12 Inch Wheel Available in Several Formats | Ed Sparks | Inventor | 1 | 19-01-2004 07:12 |