Set Jaguar device number via cRIO

1. If I had a nickel for every time I heard "But we passed at XXXX regional" I would have retired a long time ago. - Al Skierkiewicz [more]

		Chief Delphi > Technical > Electrical > CAN
Set Jaguar device number via cRIO

Thread Tools

Rate Thread

Display Modes

#11

10-05-2010, 00:31

biojae

Likes Omni drives :)

AKA: Justin Stocking

FTC #5011 (BOT SQUAD) && FTC#72(Garage bots)&& FRC#0399 (Eagle Robotics)

Team Role: College Student

Join Date: Oct 2008

Rookie Year: 2008

Location: Lancaster

Posts: 276

Re: Set Jaguar device number via cRIO

Quote:

Originally Posted by kamocat

Buy the cable? It's just a female RJ25 connected to a female DB9. Is the digikey part specially shielded? I don't have shielding over any of my CAN bus.

No, there is no shielding in the digikey adapter.

It seems that in other adapters (maybe only the ones I bought), that the spacing between the side of the adapter and the pins was slightly off.
The slot was large enough to allow the 6 pin cord to fit in and latch, but the off spacing would make the pins not line up causing no comms in either direction.

Try a continuity test between the pins of the 6 pin cord and the cords inside the adapter (or the DB9 pins).

__________________
FTC Team 72 - No site
FRC Team 399 - http://www.team399.org
2010 Rockwell Collins Innovation in Control Award - (Use of the CAN bus, among other reasons) Phoenix, Arizona!

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Set computer to receive it's IP via DHCP?	grosh	FRC Control System	21	28-05-2010 16:33
Set Jaguar device number via cRIO	kamocat	FRC Control System	0	08-05-2010 20:41
CAN Jaguar code set up as a VxWorks Library	taichichuan	CAN	0	21-02-2010 22:16
Unable to set team number	Erebos	FRC Control System	4	27-01-2009 17:00
Can not set team number on DS	TekClaz	FRC Control System	2	23-12-2008 14:25

All times are GMT -5. The time now is 04:18.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.