|
|
|
 In real life (IE when you go to apply your engineering skills to tasks in industry) there will be constraints on all sorts of things - many of which may or may not be "fair" or even "intelligent". You must learn to either work around them or use them to your advantage - preferably a bit of both. - OScubed [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Post season comm 'tween DS and Game adapter
When we were at competition, they set up game adapters to talk to the field system. Is there a setup we can implement so our DS router will talk to the adapter as it was set at competition, or do we need to reset the adapter?
|
|
#2
16-05-2010, 17:02
|
|||||
|
|||||
|
Re: Post season comm 'tween DS and Game adapter
The gaming adaptor was set to use WPA with an event generated code at competition.
Here are directions for turning it off at home, so it will be back to normal. You can also verify that the other bridge settings match your router settings and how you like to operate at home, e.g., SSID=team # Last edited by Mark McLeod : 16-05-2010 at 17:05. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cannot communicate with game adapter | rsisk | FRC Control System | 13 | 21-06-2010 16:27 |
| Radio/game adapter on robot not working? | RoboGuy | Technical Discussion | 4 | 15-04-2010 00:24 |
| crio looses comm and code after V20 upgrade. | ksanger | Programming | 5 | 07-03-2010 11:51 |
| Can ping CRIO and bridge, but DS shows no comm and no code | Green2 | FRC Control System | 3 | 22-01-2010 23:55 |
| FIRST, Game Theory, and a few things to keep in mind this season | Eric Finn | Rules/Strategy | 0 | 06-01-2007 19:18 |
Linear Mode
