|
|
|
 The closest thing to "Senior Mentor" we have is "Team Grandma". :) - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| The closest thing to "Senior Mentor" we have is "Team Grandma". :) - Alan Anderson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#33
23-05-2010, 20:10
|
|||||
|
|||||
|
Re: Denso Window Motors, Warning - Don't use with Jaguars !
Gary,
I had received no further reports of issues with Window motors. However, I reviewed the waveforms Tom posted on the previous page. If his captured waveforms are correctly identified, there would seem to be a typical inductance current waveform on the Victor pictures at less than full throttle while the Jaguar waveforms show no sign of inductive current which they should at 15kHz. Since there is no reactive component to the Jaguar waveforms, is it possible that the temperature protection has some fairly high impedance at 15 kHz? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Electrical Connection for Denso Window Motors | skotmorris | Motors | 12 | 22-02-2012 16:12 |
| Denso WIndow Motors, torque. | John G | Motors | 1 | 29-01-2010 21:25 |
| Ampage for the Denso Window Motors. | Joshamuffin | Motors | 1 | 07-02-2009 17:42 |
| Powering the Nippon-Denso Window Motors | Excelsior | Electrical | 1 | 28-01-2006 22:48 |
Threaded Mode