2010 Image Demo

Rangel(kf7fdb) · #1 02-09-2010, 18:31

I followed all the instructions and this time used internet explorer and everything looked like it worked but we are still not seeing a camera image in the driver station. We can see the camera image when attempting to modify though.

Radical Pi · #2 03-09-2010, 18:08

Is the ring of light on the camera green when the robot is running?

also fyi the camera takes much longer to boot than the rest of the robot, so the images starting will be slightly delayed

kamocat · #3 03-09-2010, 18:16

Are you saying that the Dashboard shows the camera image when run as a VI, but not when run as an .exe?

Rangel(kf7fdb) · #4 04-09-2010, 21:32

The camera light is green but on the dashboard, the camera image is white.

kamocat · #5 05-09-2010, 11:42

Could you take a screenshot?
If it's that dimpled texture, then that means it's not getting an image. If it's actually solid white, then that means the image it's receiving is all white, which is a strange image indeed.

Rangel(kf7fdb) · #6 07-09-2010, 10:34

Here is a screenshot.

Mark McLeod · #7 07-09-2010, 11:13

How come your Dashboard is broken?

Bot190 · #8 07-09-2010, 15:21

If you look in the top right corner just above the actual dashboard, you will see an arrow. When the arrow is broken like it is in your picture, it means something isn't wired right on the block diagram. That's probably why you aren't getting a picture.

Rangel(kf7fdb) · #9 07-09-2010, 18:18

Sorry, I posted the dashboard of another driver station on a different computer because the programming laptop was not accessible. Here is the real print screen. Also, we are programming in windriver.

Rangel(kf7fdb) · #10 07-09-2010, 18:57

Here is the print screen of the configuration. Here, we have an image.

Greg McKaskle · #11 07-09-2010, 19:47

Since you can connect to the http server on the camera and see that it works there, switch to the config pages and look at the user accounts and settings. In particular, see that the camera has an account with user name of "FRC" with same for password. This is normally done by the Camera Configuration, but can also be done by hand.

Greg McKaskle

Rangel(kf7fdb) · #12 07-09-2010, 19:55

We just managed to get it working by messing around in the configurations. We don't really know how we did it but we did.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Decoupling the image acquisition from the Image Processing	Tom Line	Programming	8	09-03-2010 17:52
2010 FRC camera vision tracking delay, image processing lag	pspeer	C/C++	18	18-02-2010 07:24
Running a .out file from 2009 with a 2010 image	GabeRC1717	C/C++	4	14-01-2010 16:19