|
|
|
 Belts are a fine way of transferring power in a robot. Like chains, gears, drive shafts, viscous couplings or any other means of transmission they require some care and attention on you're part. But no one said this robot stuff was going to be a cake walk. - Andy A. [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: 2010 Image Demo
How come your Dashboard is broken?
|
|
#2
07-09-2010, 15:21
|
||||
|
||||
|
Re: 2010 Image Demo
If you look in the top right corner just above the actual dashboard, you will see an arrow. When the arrow is broken like it is in your picture, it means something isn't wired right on the block diagram. That's probably why you aren't getting a picture.
|
|
#3
07-09-2010, 18:18
|
||||
|
||||
|
Re: 2010 Image Demo
Sorry, I posted the dashboard of another driver station on a different computer because the programming laptop was not accessible. Here is the real print screen. Also, we are programming in windriver.
|
|
#4
07-09-2010, 18:57
|
||||
|
||||
|
Re: 2010 Image Demo
Here is the print screen of the configuration. Here, we have an image.
|
|
#5
07-09-2010, 19:47
|
|||
|
|||
|
Re: 2010 Image Demo
Since you can connect to the http server on the camera and see that it works there, switch to the config pages and look at the user accounts and settings. In particular, see that the camera has an account with user name of "FRC" with same for password. This is normally done by the Camera Configuration, but can also be done by hand.
Greg McKaskle
|
|
#6
07-09-2010, 19:55
|
||||
|
||||
|
Re: 2010 Image Demo
We just managed to get it working by messing around in the configurations. We don't really know how we did it but we did.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Decoupling the image acquisition from the Image Processing | Tom Line | Programming | 8 | 09-03-2010 17:52 |
| 2010 FRC camera vision tracking delay, image processing lag | pspeer | C/C++ | 18 | 18-02-2010 07:24 |
| Running a .out file from 2009 with a 2010 image | GabeRC1717 | C/C++ | 4 | 14-01-2010 16:19 |
Hybrid Mode
