Working with the PSoC

[EricVanWyk]

Should've mentioned this earlier - http://www.cypress.com/?app=forum
That forum will likely be much better suited for you, as they actually know what they are doing

Originally Posted by PortugazD.Ace

I'll probably create a custom circuit board using DipTrace, and designing an ethernet port into it. I'll probably have to talk to my team's programmer on setting up a command conversion tool.

Word of Fair Warning - That is a big chunk to bite off. You'd be well served by breaking it down into a few smaller chunks.

Consider using I2C or SPI instead of Ethernet as your communication protocol - they are slower, but have fewer "gotchas" and are better supported by the PSoC.