yes comunication, yes code but no response by robot

[DaBossToss]

Originally Posted by Alan Anderson

The word "OFF" should be visible next to switch #1. If the DIP switch is activated in that direction, the switch is off. If the DIP switch is activated in the other direction, where the switch numbers are visible, the switch is on.

If they were all in the same direction and the robot was still at least partially functional, it's a good bet they were all off.



So, how about those other questions I asked a while back?

You said you could control a solenoid.
---> What is the solenoid connected to?
---> When you change the state of the solenoid, do any LEDs also change state? If so, which one(s)?

I'd like to get as specific as possible about what is working and what is not.
---> What is the Driver Station reporting for the battery voltage?

a module in number 8 of cRIO
yes the leds on the side of module change depending on which solenoids we turn on
and i cant answer your last question because ever since i switched all the switches to off except console out i have not been able to communicate.