Configuring router as a bridge?

[Alan Anderson]

Originally Posted by Mikesername

if the router is connected to the cRIO this way, will it wirelessly connect to the driver's station or will it have to be tethered?

The Driver Station does not have the capability of using 802.11n Wi-Fi on the 5 GHz frequency band. The "official" configuration of the WRT610N router has the 2.4 GHz frequencies disabled. You will have to modify the wireless settings on the router to enable 802.11g at 2.4 GHz, setting an appropriate SSID. Once you do that, the Driver Station (and any other 802.11b/g devices) should be able to connect to it wirelessly.