Grey Jaguar No Power Out

[dyanoshak]

Originally Posted by Mark McLeod

If the limit switch jumpers were missing, then you'd also get those symptoms - red/green LED but no power out.

That isn't entirely accurate. When the limit switch input is open (no jumper), you will get a slow blink red indication on the LED if you try and drive the Jaguar in the direction with the open limit switch.

Are you using PWM or CAN to communicate with the Jaguar?
Is this a brand new, out of the box Jaguar?
Have you noticed any ESD (Electro Static Discharge) events?
Have you unscrewed the screw terminals completely (aka using ring terminals)?
Metal shavings in the case?

-David