[FTC]: some FCS questions

[johncap100]

We are using Robot c.

When the joystick window comes up, there are two green circles to the left of the two red and two blue driver alliances. We are using 2 joysticks for one driver.
There is a question mark flashing to the right of red driver 1, we press the square driver 1 station button and the question mark goes away.
If we press the actual circles there is no response, so we assumed that by pressing the square driver 1 button the joysticks are assigned.

Do we do something further to assign the joysticks? We have noddled around and have no where to further assign the joyosticks.

thanks

[ssi]

Pressing the square does not assign the joysticks. You have to press a button on the joystick itself. The joysticks will be assigned in the order you push the joystick buttons. When you press a button on the joystick, the green circle will move to be beside the selected driver location. After you assign the joysticks, you should see a green circle beside each of the drive positions. When the main screen is displayed you should see two green circles under the status window for Red Team 1 (presuming you assign two joysticks to Red Team 1). When you press buttons on the joysticks, the corresponding circle will "light" up.

[johncap100]

thanks that worked. It is up and running

thanks again once again people on chief delphi bailed us out