Go to Post You can learn just as much from building a small robot as you can from a large bot because all of the key concepts are the same. - Greg Needel [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Spotlight this post!  
Unread 12-11-2010, 10:50
JamesCH95's Avatar
JamesCH95 JamesCH95 is offline
Hardcore Dork
AKA: JCH
FRC #0095 (The Grasshoppers)
Team Role: Engineer
 
Join Date: Dec 2004
Rookie Year: 2001
Location: Enfield, NH
Posts: 1,885
JamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond reputeJamesCH95 has a reputation beyond repute
Re: Welding Advice

Having used a Miller Diversion 165 and having experience TIG welding and teaching TIG welding I have some suggestions:

-Skip the Diversion unless you plan also buying a foot pedal. The finger control is handy for out-of-position welding, but is awkward to learn with. I would consider something from Everlast which is lighter-duty than the Miller, but a lower cost with more handy features.

-Spend extra money getting one or two good auto-tint helmets. I would get one with at least three light sensors (it sucks if all of the sensors become blocked for whatever reason, never happened with my 3-sensor lens but did with my 2-sensor lens). Observers/instructors can use solid lens helmets with no detriment.

-Get gloves with long cuffs, preferably a cuff that can be cinched over jacket sleeves. I really like my BSX welding jacket and gloves, best I've ever used but not the most expensive. $30 for the jacket and $20 for the gloves IIRC.

-If you're welding aluminum get 50Ar/50He mixed gas, makes TIG welding aluminum much easier than straight argon, worth every penny many times over. Get Ar as well if you plan to do steel welding.

-4340 AL rod will comfortably weld most aluminum alloys, this is your bread-and-butter welding rod. Be careful to ask for TIG rod, not to be confused with wire which usually refers to MIG wire.

-With TIG a welding apron isn't typically needed because there are no sparks or spatter.

-Get lanthanated or zirconated tungsten electrode packs (orange band and white band respectively). Pure tungsten is pure garbage and thoriated tungsten is radioactive . Get lots (1-2 packs of each size) of spare electrodes and nozzles, especially since your team is learning.

-Get a bench grinder to ONLY use for sharpening tungsten electrodes.

-Get an angle grinder with a flap sanding disc, this will make weld prep go very quickly.

-www.weldingtipsandtricks.com is just about the best website for practical welding advice. Jody, the guy who operates the site, is happy to answer questions via email and is very responsive. Read the pages on learning how to TIG weld aluminum, they are very useful.

Good luck! TIG welding is a great skill and not terribly difficult to learn. Just practice practice practice with bead on plate and you'll figure it out!

Feel free to PM or email me (jamesch13[at]gmail) with any questions as well!
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.

Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
welding table Bruceb General Forum 17 17-03-2009 18:07
Welding Shira Technical Discussion 9 08-01-2009 20:23
Welding? tgwalker Rules/Strategy 16 17-01-2008 15:15
No welding? Katie Reynolds Rules/Strategy 7 20-02-2003 17:33
WELDING BOOTY BURGLAR OCCRA 2 05-10-2001 21:22


All times are GMT -5. The time now is 23:28.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi