|
|
|
 Please Note: Elgin is still wearing his safety glasses. Practice safe Dewing. - JohnBoucher [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Please Note: Elgin is still wearing his safety glasses. Practice safe Dewing. - JohnBoucher [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Control a motor without the use of the joystick
I want to be able to control the motors through the inputs on the computer, not the joystick. I want to be able to go onto the driver station and use the inputs and controls on the screen to make the robot move forward and backwards.
|
|
#2
16-11-2010, 20:04
|
||||
|
||||
|
Re: Control a motor without the use of the joystick
Oh, you mean you want to use the computer's GUI to control the robot?
I think your best option would be to use the Driver Station's simulation of the PSoC I/O. While it would be nice to build an application to send whatever info you want to the robot, this is not allowed within the rules of FRC.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Joystick Read VI and Passing Variables to the Control | Stealth | NI LabVIEW | 3 | 24-01-2010 12:59 |
| Is it possible to use CAN, a camera, and the wireless without the 2Can adapter? | Steven Sigley | CAN | 4 | 22-01-2010 16:50 |
| Camera servo control off of the Joystick axes | m3rc1l3ss | NI LabVIEW | 5 | 13-03-2009 20:00 |
| Can any one help us with programing the encoder to control the motor by ticks? | Must Be Drama | NI LabVIEW | 4 | 09-02-2009 20:54 |
| Why use the RC to control Pan/Tilt | Joe Hershberger | Programming | 15 | 30-01-2007 23:41 |
Hybrid Mode
