Wireless Set Up Problem

[mprikril]

We are trying to set up a prototype using a new cRIO but with our old wireless router and bridge and are running into an interesting problem.

With the IP address of the PC set to 10.0.56.10, I plug the PC into the router and if I browse for 10.0.56.4, I can see the router set-up (with the correct settings)

If I plug the PC directly into the wireless bridge and browse to 10.0.56.1, I can see the bridge set-up (with the correct settings)

However, if I plug the PC into the router with no connection to the bridge, I can not see the Bridge

Any ideas on what's wrong here? thanks