Kinect LabView Drivers

[Ryan Gordon]

Originally Posted by SuperS_5

Hi, this has grabbed my interest. I believe that LabVIEW does support isochronous connections. Although I could only find documentation on Firewire and isochronous data transfer, I have successfully used every USB webcam that I have tried with LabVIEW. The IMAQ USB drivers have to be installed. They are available to download from NI, but, I am unsure of any licensing. (I think only the NI Vision module has to be activated, not the drivers) If the device can be enumerated via USB devices, it should work via IMAQ USB capture.

At this point, I've switched to using the OpenKinect project as a dll (based on cross-platform libusb). Much easier to work with their framework rather then reinvent the wheel I previously tried using the VISA interface for USB capture which doesn't support isochronous transfers.

Originally Posted by Brandon_L

I am EXTREMELY interested in this. Do you plan on releasing it when its done?

I certainly am; I should have source code up in my github fork within the next few days.