|
|
|
 It would be wise to consider the reasoning behind the statement rather than the statement itself. Sometimes they are right... other times their statement is incomplete... and other times they really do have no clue what they are talking about. - dtengineering [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Rookie Classmate Failure
I am attempting to image a new/2011 Classmate using the "2011 Image for '11 Classmate" flash drive and following the instructions in "HOW TO SET UP YOUR 2011 DRIVER STATION". I can get to the point where it says:
Image applied successfully!When I press a key, the command prompt sits at the F:\ drive and does nothing, so I either exit the command prompt or reboot the Classmate manually. Then it bluescreens and reboots to the standard Windows Error Recovery screen immediately when the screen with a progress bar and "(c) Microsoft Corporation shows up. None of the options work, but when I boot to safe mode, the last thing it loads before crashing is \Windows\system32\DRIVERS\classpnp.sys I'm afraid that I may have a bad image, since I've tried everything I can think of - even using different USB ports, removing the USB drive before and after pressing a key to continue, leaving it in, etc... Please let me know if you have any ideas how I should proceed. Last edited by Techie_Teacher : 09-01-2011 at 01:51. Reason: Improved clarity 
|
|
#2
11-01-2011, 06:46
|
|||
|
|||
|
Re: Rookie Classmate Failure
If the image key provided in the KOP truly is defective, you may be able to request a new one by clicking on the "Submit a Replacement Parts Request" link in TIMS. Be sure to be specific. Other than that, I really don't know how to solve your problem other than borrowing another team's image key for about 30 mins.
 Last edited by Baconfly : 11-01-2011 at 06:47. Reason: Who would quote the only post on the page? oh right, me. :D
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
