|
|
|
 The best we can all do for our kids as parents, mentors and world citizens, is to model [Gracious Professionalism] always: not to win an award, but because it is the right thing to do. - chapman1 [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Articulated arm vs Forklift style arm
I was wondering if anyone had any experience with forklift style mechanisms in FRC bots. I would be interested in hearing the pros and cons of such a system when compered to a twin joint articulated arm.
|
|
#2
10-01-2011, 22:16
|
||||
|
||||
|
Re: Articulated arm vs Forklift style arm
Here are some of the pros and cons we've come up with while narrowing down are choices of a manipulator mechanism.
Forklift Pros: -We have experience with it -Simple to do -Doesn't require a lot of machining Forklift Cons: -Not very robust (in our experience) -Requires upkeep during competition -Can't change orientation of object (in itself, requires more mechanism to do so) Articulated Arm Pros: -Can manipulate object in a variety of fasions Articulated Arm Cons: -Power Consumption -Weight -Complex |
|
#3
10-01-2011, 22:17
|
||||
|
||||
|
Re: Articulated arm vs Forklift style arm
I would suggest looking here: http://thebluealliance.net/ for the 2007 matches. I think doing your research by watching the matches will give you the best idea of what to do. Remember, just because a complicated-looking device works very well from the past, it is no guarantee of what your team can produce. Stay within your capabilities and get the 'bot done early, so you can practice with it!
Good luck! |
|
#4
10-01-2011, 22:23
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
The biggest con with an arm this year is the 60' rule!
|
|
#5
10-01-2011, 22:27
|
|||||
|
|||||
|
Re: Articulated arm vs Forklift style arm
772 has ahad great advantigase with a fork lift and was one of my first ideas when i first saw the game this year ... here is some pictures of the fork lift from 2008 overdrive.
http://photos.sabrerobotics.com/disp...album=45&pos=0 It was extremely strong and could even pic up it elf by doing chin ups on the bar. but was heavy having hains linked from top to bottom a few times. |
|
#6
10-01-2011, 22:29
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
Quote:
|
|
#7
10-01-2011, 22:53
|
||||
|
||||
|
Re: Articulated arm vs Forklift style arm
Make sure you analyze the degrees of freedom of the gripper/forklift/articulated arm manipulator. What degrees do you NEED to perform the task? What degrees will HELP perform the task? What degrees will be EASILY CONTROLLED? What degrees will be EASILY PROGRAMMED (remember repeatability is very important)? What can be EASILY CREATED & TESTED with your team's resources? Turn around time is very important to give the programmers time to work out kinks with autonomous and for the drivers to get some practice in. From there you can decide which rotational and/or which translational degree(s) of freedom will best allow your robot/team to complete the task.
Good luck, I hope this helps! |
|
#8
11-01-2011, 01:02
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
Quote:
|
|
#9
11-01-2011, 01:11
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
I would say a con for the articulated arm is the complexity of the programming compared to the fork lift. Its only a bit trigonometry, but its not awfully complicated. To make it great is really hard
|
|
#10
11-01-2011, 01:45
|
||||
|
||||
|
Re: Articulated arm vs Forklift style arm
Quote:
|
|
#11
11-01-2011, 01:56
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
Quote:
 I said COMPARED. anyways I was gonna do a very simple mechanism, like the platforms that are like a giant car jack. IDK what they are called, but they are powered with pneumatic actuators. I thought that since they extend to a known distance, I can easily have 2 levels of height. First for the 2nd level and Second for the top. Yea apparently I can not do full automation this year due to the lack of fund... We used it for the 2nd regional, I thought my mentor said we are only doing 1 and that we had enough funds for all the sensors and stuff, apparently not.I mean great as in: http://www.youtube.com/watch?v=vu6APoC0IOA or http://www.youtube.com/watch?v=5cORKyFr_7E Last edited by davidthefat : 11-01-2011 at 01:58. |
|
#12
11-01-2011, 03:05
|
||||
|
||||
|
Re: Articulated arm vs Forklift style arm
Elevator is the way to go!
|
|
#13
11-01-2011, 09:04
|
|||||
|
|||||
|
Re: Articulated arm vs Forklift style arm
Quote:
Quote:
|
|
#15
11-01-2011, 09:38
|
|||
|
|||
|
Re: Articulated arm vs Forklift style arm
My team is considering using a vacuum to pick up the tubes instead of an arm, does anybody think that is a bad idea?
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
(since 2004)
Linear Mode
