|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#26
|
||||
|
||||
|
Re: <R11> Dimension wrong?
The rule gives you two possible diameters that your robot must stay within, 60" or 213.4 cm. I know which one we're using.
Seriously, I have a strong hunch the correction will turn out to be 84". Looking at the table, it is easy to imagine how the 60" could have been a typo, mixed up with the 60" in the starting height box. How likely is it that you would accidentally pull the number 213.4 out of the air as a typo? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|