pic: 2791's Chassis

[Stephen of REX]

Are the extra CIMS intentional? We're only allowed four this year.

[Vikesrock]

Originally Posted by Stephen of REX

Are the extra CIMS intentional? We're only allowed four this year.

$10 says they represent RS775s through a CIMulator.

[Chris is me]

Originally Posted by Vikesrock

$10 says they represent RS775s through a CIMulator.

Yup. They'd be FPs, but we only got one...

[DMetalKong]

Originally Posted by Vikesrock

$10 says they represent RS775s through a CIMulator.

Where exactly are the CIMulators from? I've heard them mentioned a couple of times, but I've done a search on CD and a google search and I couldn't find a link.

[Akash Rastogi]

Originally Posted by DMetalKong

Where exactly are the CIMulators from? I've heard them mentioned a couple of times, but I've done a search on CD and a google search and I couldn't find a link.

BaneBots new product. (read AM)


Very nice stuff Pinecone (Idc how much I like your team, I still get to make fun of you!)

[Leav]

Originally Posted by Akash Rastogi

AM's new product.

Link?

[Akash Rastogi]

Oh my bad my bad. Mixed up the name with the CIMple Box from AM

[Chris is me]

Originally Posted by Akash Rastogi

AM's new product.

Actually, nope. Banebots is making it. Check their website.

I wish it were an AM product though

[Nemisis]

Nice use of Inventor!!

[JackS]

You can view some preliminary pictures with electronics here.

We are planning on using Anderson connectors to enable us to put the Victors much closer together than otherwise possible. Wire paths have yet to be drawn out.

[Navid Shafa]

A) Are you planning on running the chain on the inside of the frame?
B) Are the bumpers going to be mounted right onto the standoff blocks, without any other support?

[Sh1ine]

Originally Posted by Navid Shafa

A) Are you planning on running the chain on the inside of the frame?
B) Are the bumpers going to be mounted right onto the standoff blocks, without any other support?

Yes and Yes.

The spacing between the edge of one stand off and the edge of the next closest stand off is always less then 8". Which is to say that the center points on the standoffs may be a bit more then 8, but if I am reading the rules correct "and no section of BUMPER greater than 8” may be unsupported)" just having material behind it suffices. And with a bolt holding it in place, and a generous amount of stand off to support the bumper from twisting, they should be good.

[Chris Fultz]

Nice work.

Something to consider. It looks like very little ground clearance.

If you have anything stick through the bottom plate, it could rub the carpet.

And, there is a small step in the carpet around the towers. There is a plate under the tower base, and then a layer of carpet covering it.

[Justin Montois]

Looks great. I love the belt running through the tube. Very slick.

[Leav]

Originally Posted by 340x4xLife

Looks great. I love the belt running through the tube. Very slick.

I would actually say that is my least favourite feature about this chassis.
it's cool no doubt, but looks like a pain to maintain if you throw a chain...

A lesson I learned from my mentor a while back was to design for maintainability, as well as performance and looks.