|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Minibot maximum dimensions
Everyone knows that the minibot can be no larger than a 12x12x12" cube. However, does this relate at all to a particular orientation? If you think about a cube, the distance from one corner to the opposite is greater than 12 inches, it's around 20".
Would it be possible to use a minibot that is 20 inches tall, but still fit in a 12x12x12" cube, or do those dimensions specifically refer to height, length, and width in relation to the arena floor? |
|
#2
|
|||||
|
|||||
|
Re: Minibot maximum dimensions
It's a 12x12x12" cube. If it fits in the box, it fits. If it does not, then it does not.
|
|
#3
|
|||||
|
|||||
|
Re: Minibot maximum dimensions
Quote:
|
|
#4
|
|||||
|
|||||
|
Re: Minibot maximum dimensions
The minibot is supposed to be inspected for legal volume using a sizing box. I don't know if a "diagonal dimension" loophole will work if the minibot won't sit flat on the base of the box.
|
|
#5
|
|||
|
|||
|
Re: Minibot maximum dimensions
Quote:
In theory, the minibot could be a 20 inch long "pencil" although, other restrictions mean it cannot be a pencil. But it would seem if done right, it could exceed 12" in one direction by a considerable amount. |
|
#6
|
||||
|
||||
|
Re: Minibot maximum dimensions
Quote:
JMHO, |
|
#7
|
|||
|
|||
|
Re: Minibot maximum dimensions
Quote:
Now why you'd want to do that? I have no idea. But I enjoy thinking out of the box, or rather, right up to the extents of the box. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|