C++ Vision Camera Problems

[masoug]

Seems like socket problems to me...

[James Tonthat]

(I'm not the programming mentor so I'm not fully informed.)

We made a new electronics board with different cRio we had, and had installed 2011 and the newest versions of everything (including the DS update) on a laptop with a fresh install of Windows 7 and we received the same errors.

I'll see if the errors are different than the ones we had gotten with the 2010 software.

Thanks for the input, we'll try some different things and document it at tomorrow's meeting and post back on Chief.

Edit: Could you elaborate on the 'socket problem' comment? Thanks.

[masoug]

When Joe referred to the "S_errno_ETIMEDOUT or S_errno_ECONNREFUSED" errors this means that the socket cannot connect successfully and transfer data safely. The TIMEOUT error means that there is contact with the server, BUT the server is not responding to the client. CONNREFUSED means that the server actively rejected the request from the client. So my suspicions may be the misconfiguration of the camera OR that the current camera code does not handle the camera instance properly. Did other teams get their camera to run successfully under the same conditions?