Is there a pre-built labView program for rookie teams?

[Mark McLeod]

This is the one I mean, where I've marked the screen in blue, click on that.

[bkeinath]

That option does not show up on my computer. Perhaps the software was not installed correctly.....is there a way to get this...or do I need to reinstall?

[Mark McLeod]

Did you apply the LabVIEW software update Alan refers to?
You do that after using the LabVIEW installation DVD.
Ther's a link in my signature where you can get it.

You can run the LabVIEW installer and update again and it's smart enough to add anything you might have missed.

[torihoelscher]

Originally Posted by bkeinath

That option does not show up on my computer. Perhaps the software was not installed correctly.....is there a way to get this...or do I need to reinstall?

http://usfirst.org/roboticsprograms/....aspx?id=18758

Click and it should give you the locations with the updates. I had the same issue and I had to redo everything so to avoid it, you must click on the URL and download the updates.

http://joule.ni.com/nidu/cds/view/p/id/2262

here is the link to one download

http://joule.ni.com/nidu/cds/view/p/id/2263

another one.

http://joule.ni.com/nidu/cds/view/p/id/2261

last one

extract and run the app.

Good luck and may the force be with you!!!

[Mark McLeod]

Here's what the LabVIEW startup screen looks like right off the Install disk, if you have NOT installed the required update.