Quote:
Originally Posted by iCurtis
John,
From the pictures you post, it seems like 148 moves directly from cardboard and Vex into sheet metal and the production robot. Is this the case? For the robots I've worked on, we typically went from cardboard to plywood to plywood & shafts powered by drills to rough cut aluminum then to the final robot part. It seems like you skip by that rough aluminum step. I know you use a lot more CAD than we did, but do you just trust that your Vex and cardboard dimensions are "good enough"? Or do you end up rebuilding some manipulators if you find that your dimensions don't work as well as you anticipated?
|
We prototype until we get the critical dimensions. The prototypes that merit it, get more detailed work. Last year we did a 1:1 fully functional version of the entire intake + kicker out of old robot parts and sheet metal. You can see this in our 2010 video.
Some stuff goes right from cardboard into CAD into sheetmetal...
-John
Remember that starting a team is ALOT of work, but it’s a lot of fun once it gets going. Its all about the students, so don’t get too carried away ;) - Travis Covington [more] 
14-01-2011, 00:50
Threaded Mode