DAP-1522 - Errors Setting IP Address

[Laura Rhodes]

We're having trouble configuring the Static IP address setting on our new DAP-1522 radio. We followed the instructions in the manual "How to Configure Your Radio.pdf", and tried to enter an access point IP address of 10.1.0.1 (to comply with the form 10.xx.xx.1 for team # 100).

An error message pops up that states that 10.01.00.1 is an INVALID IP address.
We tried entering the IP address in a variety of forms thinking it may be a parsing error (10.1.0.1, 10.01.0.01, 10.01.00.01, etc.). All resulted in the same error message.

The radio WILL accept 10.19.95.1 (as in the example) and 10.10.0.1 (tried in desperation) but will not accept the proper IP address required for Team 100.
What else should we try?

[iblis432]

We had the same problem with 10.21.06.1

We finally fixed the problem by using 10.21.6.1
I don't know how this works if you have a team 216, but it's what we will use for now. As for team 100, I don't know. It seems to dislike leading zeros though. Perhaps something that should be brought up with FIRST?

[ATannahill]

Originally Posted by iblis432

We had the same problem with 10.21.06.1

We finally fixed the problem by using 10.21.6.1
I don't know how this works if you have a team 216, but it's what we will use for now. As for team 100, I don't know. It seems to dislike leading zeros though. Perhaps something that should be brought up with FIRST?

Team 216 will use the ip 10.2.16.1.

[iblis432]

Originally Posted by rtfgnow

Team 216 will use the ip 10.2.16.1.

I'm well aware of this, but it is what we are using for now until we can figure out how to get it to accept 10.21.06.1

[ATannahill]

Originally Posted by iblis432

We had the same problem with 10.21.06.1

We finally fixed the problem by using 10.21.6.1
I don't know how this works if you have a team 216, but it's what we will use for now. As for team 100, I don't know. It seems to dislike leading zeros though. Perhaps something that should be brought up with FIRST?

Originally Posted by iblis432

I'm well aware of this, but it is what we are using for now until we can figure out how to get it to accept 10.21.06.1

These posts are contradictory. 10.21.6.1 is not the same as 10.2.16.1. There will be no problem.

[iblis432]

Originally Posted by rtfgnow

These posts are contradictory. 10.21.6.1 is not the same as 10.2.16.1. There will be no problem.

Oh your right, my bad, I had misread what myself and the others wrote. XD My mistake

[Bot190]

For the OP have you tried 10.1..1? Seeing as it doesn't like 0's it might accept nothing there.

[Mark McLeod]

I tested your IP address with our radio and didn't get the error message, not that it helps you fix your issue.
I did confirm that it doesn't like, and won't accept, leading zero's.

e.g.,

Good: 10.3.58.1

Bad: 10.03.58.1