|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Classmate Netbook
Ok, but can you put virtual buttons on the dashboard to be used during the game?
|
|
#2
|
||||
|
||||
|
Re: Classmate Netbook
From personal experience from last year, NOT in the DRIVER STATION section (the lower half). The Dashboard (the upper half), however, can be changed through the use of LabView, and I would assume it's possible.
|
|
#3
|
||||
|
||||
|
Re: Classmate Netbook
As far as I know, you can not send data back from the Dashboard to the robot, so if you wanted to use something other than a joystick to set the height, you would have to use the cypress I/O board.
|
|
#4
|
|||
|
|||
|
Re: Classmate Netbook
You cannot put virtual buttons on the dashboard, but there are already some there on the input tab. You can use these if you wish. I used them last year to set driver settings (eg. inversing the controls for the people who like it that way).
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|