|
Re: pic: burnt up TETRIX motor
Quote:
Originally Posted by Al Skierkiewicz
A 5 or 6 amp fuse in line with each motor might be a good protection. If installed properly with insulation, etc., I do not see any rule that would prevent it. The stall current on the motor is listed at 7 amps I believe.
|
Pitsco sells just such a modified motor power wire:
It's hugely expensive for what it is, but it's clearly 100% legal (since it's a standard TETRIX part) and it's ready to go for those not wanting to do soldering.
http://parts.ftcrobots.com/store/det...&c=1&t=0&l= 0
__________________
Phil Malone
Garrett Engineering And Robotics Society (GEARS) founder.
http://www.GEARSinc.org
FRC1629 Mentor, FTC2818 Coach, FTC4240 Mentor, FLL NeXTGEN Mentor
|
Thats what makes FIRST so unique how culture and the time is reflected through our bots, but at the same time we all get along...with no problem. - Dan Richardson [more] 
23-01-2011, 12:25
Threaded Mode