|
|
|
 Yes, a good driver can effectively be the element that closes the loop, but only when there is a driver at the controls. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Yes, a good driver can effectively be the element that closes the loop, but only when there is a driver at the controls. - Alan Anderson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#12
20-02-2011, 11:01
|
|||||
|
|||||
|
Re: pic: Tube Sizes can Vary A Lot!
Using shop air to inflate tubes is not a problem, IF you know when to stop inflating!
I expect the regionals will have more evenly inflated tubes, but they still won't all be consistent, and if your manipulator can't deal with it, you might want to think of ways to modify your manipulator so it can deal with it. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode