pic: 2415...REDO

[Akash Rastogi]

Originally Posted by Vikesrock

There are 6 peg heights because of the offset of the middle column. If you add the feeder station and floor you end up with 8 preset heights.

Looks like another great robot from 2415! We were only at the scrimmage on Saturday so I guess the video will have to hold me over until I get to see it in action in person at Peachtree.

Should've been more clear. And yes forgot to add in floor loading and the feeder station.

[Andrew Y.]

Originally Posted by Akash Rastogi

Should've been more clear. And yes forgot to add in floor loading and the feeder station.

i think the control system has a total of 13 buttons and...then manual control...time to read the manual

[speedbuggy76]

Originally Posted by Andrew Y.

i think the control system has a total of 13 buttons and...then manual control...time to read the manual

14 independent buttons + 4 digital inputs for manual control = 18 digital inputs

We ditched the cypress board after Saturday and just wired into buttons from our old joysticks instead. It seems to be working much better, and it doesn't require us to use the classmate to take input from the buttons as the cypress did