pic: Wave Robotics 2826 2011 Robot Landshark MKIII

[Akash Rastogi]

Coolest gripper of 2011.

Good luck Tyler! Expecting the same things at Picone.

[Alpha Beta]

Looks great. I wondered if these jump drive mecanum teams would put the mecanums at lower speeds than the traction wheels. When we did mecanums at 20+ fps in 2008 they went sideways very poorly. At 8 fps I bet it strafes great.

2826 is not a secret in our books. We saw them at 10,000 Lakes and Champs their rookie year (2009) and we were very impressed.

[J93Wagner]

I see you went with the arm design rather than a elevator, and now I'm very curious to see if it is up to snuff with past years. And knowing you guys, it probably is. But alas, we will only have the assured chance to see it at WI as I know you're going to Midwest this year instead of 10K Lakes. Best of luck there and I hope to see you at WI!

P.S. Thanks to whomever sent the picture of your minibot to us! It was very helpful even if we don't have it working quite yet...

[Lil' Lavery]

Originally Posted by Bjenks548

"Jump Drive: 8 FPS Mecanum, 13FPS plaction wheels"
Curious why the mecanums would be geared slower then the placation. I would assumed you would be running on the mecanums most often and use the placation to push...

I'd expect that they're using their mecanums as "fine tuning" wheels for maneuvering in the scoring area and picking up tubes, in order to save on time having to back up and reposition. Their plactions will likely be used to traverse the open field to get to new tubes and get back to the safe zone.