|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: frc 2200 chassis
|
|
#2
|
|||
|
|||
|
Re: pic: frc 2200 chassis
|
|
#3
|
||||
|
||||
|
Re: pic: frc 2200 chassis
2 Cim drive? Cant wait to see the shooter in action.
|
|
#4
|
|||||
|
|||||
|
Re: pic: frc 2200 chassis
Wow. That's a lot of material.
-Nick |
|
#5
|
||||
|
||||
|
Re: pic: frc 2200 chassis
My guess is that is just 1/2 of the bot
|
|
#6
|
|||
|
|||
|
Re: pic: frc 2200 chassis
Quarter inch aluminum with 2 CIM drive? I'm scared for you.
|
|
#7
|
||||
|
||||
|
Re: pic: frc 2200 chassis
Quote:
![]() Last edited by Bochek : 27-01-2013 at 21:04. |
|
#8
|
|||
|
|||
|
Re: pic: frc 2200 chassis
6 CIMs the other 2 for the pod are not attached yet
|
|
#9
|
|||
|
|||
|
Re: pic: frc 2200 chassis
That gearbox only looks like it can hold 1 CIM.
|
|
#10
|
||||
|
||||
|
Re: pic: frc 2200 chassis
Look closely at the small plate: the other 2 go inside the frame.
|
|
#11
|
||||
|
||||
|
Re: pic: frc 2200 chassis
Quote:
(Funnily enough, passed my Simbotics post without even knowing it.) Last edited by CalTran : 27-01-2013 at 20:47. |
|
#12
|
||||
|
||||
|
Re: pic: frc 2200 chassis
There was not enough room to fit 3cim's and a shifting piston all on the inside. It was a simple matter of how to make it all fit. With the reduced dimensions of the robot this year, a standard 3/4" bore 1/2" stroke bimba piston was too long to fit we redesigned to use a shorter "flat line" piston.
|
|
#13
|
||||
|
||||
|
Re: pic: frc 2200 chassis
Or they have no drivetrain and only climb..
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|