pic: 1538 Waterjet Samples

[sanddrag]

You guys are lucky. We're cutting ours on a CNC router, and it's taking quite a while. We're looking at about 4-5 hours for a diamond pattern baseplate.

[R.C.]

Originally Posted by sanddrag

You guys are lucky. We're cutting ours on a CNC router, and it's taking quite a while. We're looking at about 4-5 hours for a diamond pattern baseplate.

Odd.

We have a pretty intricate design and it only took 35 minutes on our router. And that was me being super lazy. Could prolly get it faster.

We did a similar BP to what we've done the past few years.

Sincerely,

-RC

[=Martin=Taylor=]

Originally Posted by R.C.

Odd.

We have a pretty intricate design and it only took 35 minutes on our router. And that was me being super lazy. Could prolly get it faster.

We did a similar BP to what we've done the past few years.

Sincerely,

-RC

We gave the freshman brand new files this year.

[sanddrag]

Originally Posted by R.C.

Odd.

We have a pretty intricate design and it only took 35 minutes on our router. And that was me being super lazy. Could prolly get it faster.

We did a similar BP to what we've done the past few years.

Sincerely,

-RC

What is your material and thickness, cutter type, spindle speed feedrate, and stepover?

We are running 1/8" thick 6061-T6 plate with a 1/4" 3-flute ZrN coated variable helix endmill, 16,0000 RPM, 30 IPM, 35% stepover, dry cutting, and it's cutting nicely. We tried pushing it faster and did not have favorable results. Also, our router is only a 2.5 HP machine. Also, we're turning all the pockets to chips. No solid pieces left behind.

[Cory]

Originally Posted by sanddrag

What is your material and thickness, cutter type, spindle speed feedrate, and stepover?

We are running 1/8" thick 6061-T6 plate with a 1/4" 3-flute ZrN coated variable helix endmill, 16,0000 RPM, 30 IPM, 35% stepover, dry cutting, and it's cutting nicely. We tried pushing it faster and did not have favorable results. Also, our router is only a 2.5 HP machine. Also, we're turning all the pockets to chips. No solid pieces left behind.

There's your problem. I would contour, not pocket.

[R.C.]

Originally Posted by Cory

There's your problem. I would contour, not pocket.

Ditto,

What Cory said, we don't pocket. Its a waste of a time, we also use a mister.

-RC