pic: 1710 Teaser

[samfruth]

Originally Posted by cmrnpizzo14

Looks good, but a few questions:

1.) How fast does the CIM allow the arm to translate from one side to the other?
2.) Is it driver controlled or is there some sensory input?
3.) What is the total area covered by the arm?

I would be scared of shooting against that.

1.) we are cuttentally running it at .7 speed but it takes about 1.5 seconds to do that so about 1 second at full speed
2.) the arm is driver controlled
3.)The arm covers the lower half of the goal and a little bit more so no balls can get in if they are in range.

[cmrnpizzo14]

Originally Posted by samfruth

3.)The arm covers the lower half of the goal and a little bit more so no balls can get in if they are in range.

Sounds excellent, I should have been more specific in my first post though. What is the total lateral distance that it covers?

[samfruth]

Originally Posted by cmrnpizzo14

Sounds excellent, I should have been more specific in my first post though. What is the total lateral distance that it covers?

Something around 60-70 inches. I would have to double check with CAD team to get the specifics.