|
|
|
 Definitely read through ALL the documentation, and if you still have questions, ask. - Joe Ross [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Definitely read through ALL the documentation, and if you still have questions, ask. - Joe Ross [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#10
20-02-2003, 22:09
|
|||||
|
|||||
|
We made a stack of around 4 boxes, and lifted the boxes from the bottom all the way to the top without any problems. the robot only weighs 105lbs. and most of the heavy equipment is in the rear of the robot near the motors, plus it goes very fast, id say 8 seconds to get to the top of the ramp from starting position.
that piece in the front goes down also. so our robot can go under the bar. Our robots name is LowRider |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode