|
|
|
 It sounded like a good idea, and then I thought about it. :-/
- Wetzel [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| It sounded like a good idea, and then I thought about it. :-/
- Wetzel [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#12
07-07-2014, 07:25 PM
|
||||
|
||||
|
Re: pic: 4587-Sheet Metal Chassis V.2
Three thou is way too much interference for a press fit.
Around half a thou (.0005") is pretty standard in FRC. I suggest getting a 1.1245 (or 1.124) and .8745 (or .874) reamers to do the final finish. Here is an old thread to reference: http://www.chiefdelphi.com/forums/ar...p/t-98825.html 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode